How to reach us

+65 3159 3040

social media

Print n

  • 1. Add 3 mm of bleed

    During the production of paper products, slight cutting imperfections are to be expected - cutting can be off by a couple of millimeters from the cutting line. To allow leeway for such imperfections, you should add 3 mm of bleed on all edges of your artwork. Make sure all colors, background pictures, and elements extend to the edge of the bleed area, to avoid the appearance of white borders on certain edges after cutting. Learn more how to set up the bleed here.

  • 2. Keep your content within a 3 mm safety margin

    To ensure that no important elements (text, graphics, images) get cut off from your paper product, make sure to keep such elements at least 3 mm away from the edge of your finished product dimensions. Click here to know how to set up 3 mm safety margin.

  • 3. Fit your artwork to the printable area

    Ensure that the artwork files that you upload are compatible with the printable area of the product that you wish to order. You can find details about printable area inside the product configurator by clicking on the images.

  • 4. Use CMYK colour mode

    Except for silkscreen and pad printing, files should be prepared in CMYK colour mode. Keep in mind that if the setup is wrong, colours on the finished product may differ from the file you sent. Here is how to set your artwork to CMYK colour mode in Adobe Illustrator.

  • 5. Use an image resolution of at least 300 DPI

    To avoid blurriness, use only images and graphics that have a resolution of 300 DPI or more at actual size. Before sending your files, make sure to embed your images into the file. Read more about how to check the resolution of your assets.

  • 6. Use the right values for grey elements

    When setting up grey elements, set the black color (K) to a percentage between 0 and 100, and keep all other colors (C, M, and Y) equal to 0%.

  • 7. Use the right values for black elements

    When setting up black text, thin lines and small elements, use pure black, (i.e. C = 0, M = 0, Y = 0, K = 100). Text, thin lines, and small elements in pure black colour should be set to overprint to avoid white gaps around the text. It will give a solid edge to those elements.

  • 8. Use maximum 2 colours for lines that are finer than 2 pt

    If lines are 2 pt thick or less, use only 1 or 2 colours. 4 colours may be used for thicker lines.

  • 9. Convert all fonts to outlines, or embed them in your file

    To avoid issues with fonts when submitting your file(s), make sure to convert fonts to outlines, or to embed all fonts when saving to PDF.

  • 10. Save and upload your artwork files as PDF/X-1a

    The best format for submitting print-ready files is PDF, under the PDF/X-1a standard. Where possible, submit your files in PDF format.

  • 11. Check for overprint

    Make sure that no elements are set on overprint, unless you need them to be.

  • 12. Include a die-cut layer

    For products that include die-cutting, include a die cut layer in the artwork file.

  • 1. How long will my n last?

    The lifetime of sticker depends on its usage. Paper stickers are generally great for indoor use while PVC or Vinyl stickers will last longer in direct sunlight or outside.

  • 2. What is the fastest delivery for n?

    The fastest delivery time for n is d. Please note that you have to submit your order before 11:00 AM (AEST). Late payment or upload of your artwork might further delay your order. If you select Online Proof or Digital Proof Print during the checkout process, the production will only begin after your approval.

  • 3. Which production techniques are used?

    Our n are printed using an inkjet printer.

  • 4. How will my product be delivered?

    All of our products are delivered in a securely packed cardboard box.

  • 5. I can't find what I'm looking for. Can I request a quote?

    If you can't find what you need, please call our customer service team at the above-mentioned number to help you place an order. You can also request a quote from our customer service team for special product configurations that are not available on our website.

  • 6. Which materials can I choose?

    We offer four different types of material for n: 1) Simili stickers, a paper material that is tearable and only suitable for indoor use. 2) Mirrorcoat stickers, also a paper material but with a mirror-like gloss on the surface. Not entirely waterproof and only suitable for indoor use. 3) Synthetic matte white stickers, a plastic-like material that is non-tearable and waterproof. Suitable for indoor and outdoor use. 4) Synthetic transparent stickers, also a plastic-like material, but with the added benefit of being transparent.

  • 7. Which refinements can I choose?

    We do not offer additional finishing on our n. If you wish to you use your n outdoor, please select our synthetic matte white or synthetic transparent n.

  • 8. How can I upload my files?

    Your file can be uploaded either before you checkout and pay, or after. Please note that uploading files late might result in a moved expected delivery date.

  • 9. Which formats can I upload?

    The best format for submitting print-ready files is PDF, under the PDF/X-1a standard. However you can also upload your file in JPEG, PNG, PSD, EPS, TIFF or AI format for an additional fee of AUD 10.00. Our graphic designers will then convert your file into a print-ready PDF file.

1. Choose Your Options

    • * Width must be between 1 cm and 25 cm
    • * Height must be between 1 cm and 25 cm
    • * Your number of pages is not available.

Format

Size (Width x Height)

Print One Side Only

Full Color Front Only

Print CMYK (full color) on one side. Comes with only 1 printed side

Paper

Refinement

Finishing

Important Customer Information about ordering Stickers

  • White ink is not available for all materials under this product, as CMYK printing does not support this.
Paper Sticker Sheets

Upload Design

  • ProductPaper Sticker Sheets
  • PaperSimili Sticker
  • Format3 x 3 cm
  • PagesFront Only
  • ColorsFull Color Front Only
  • BookbindingNone
  • RefinementNone
  • FinishingSquare
  • Quantity
  • Delivery date

        Paper Sticker Sheets Review & Rating

        
        0 reviews
        No Reviews

        Guides and Tools

        Everything you need to know to get your Artwork ready

        • 1. Add 3 mm of bleed

          During the production of paper products, slight cutting imperfections are to be expected - cutting can be off by a couple of millimeters from the cutting line. To allow leeway for such imperfections, you should add 3 mm of bleed on all edges of your artwork. Make sure all colors, background pictures, and elements extend to the edge of the bleed area, to avoid the appearance of white borders on certain edges after cutting. Learn more how to set up the bleed here.

        • 2. Keep your content within a 3 mm safety margin

          To ensure that no important elements (text, graphics, images) get cut off from your paper product, make sure to keep such elements at least 3 mm away from the edge of your finished product dimensions. Click here to know how to set up 3 mm safety margin.

        • 3. Fit your artwork to the printable area

          Ensure that the artwork files that you upload are compatible with the printable area of the product that you wish to order. You can find details about printable area inside the product configurator by clicking on the images.

        • 4. Use CMYK colour mode

          Except for silkscreen and pad printing, files should be prepared in CMYK colour mode. Keep in mind that if the setup is wrong, colours on the finished product may differ from the file you sent. Here is how to set your artwork to CMYK colour mode in Adobe Illustrator.

        • 5. Use an image resolution of at least 300 DPI

          To avoid blurriness, use only images and graphics that have a resolution of 300 DPI or more at actual size. Before sending your files, make sure to embed your images into the file. Read more about how to check the resolution of your assets.

        • 6. Use the right values for grey elements

          When setting up grey elements, set the black color (K) to a percentage between 0 and 100, and keep all other colors (C, M, and Y) equal to 0%.

        • 7. Use the right values for black elements

          When setting up black text, thin lines and small elements, use pure black, (i.e. C = 0, M = 0, Y = 0, K = 100). Text, thin lines, and small elements in pure black colour should be set to overprint to avoid white gaps around the text. It will give a solid edge to those elements.

        • 8. Use maximum 2 colours for lines that are finer than 2 pt

          If lines are 2 pt thick or less, use only 1 or 2 colours. 4 colours may be used for thicker lines.

        • 9. Convert all fonts to outlines, or embed them in your file

          To avoid issues with fonts when submitting your file(s), make sure to convert fonts to outlines, or to embed all fonts when saving to PDF.

        • 10. Save and upload your artwork files as PDF/X-1a

          The best format for submitting print-ready files is PDF, under the PDF/X-1a standard. Where possible, submit your files in PDF format.

        • 11. Check for overprint

          Make sure that no elements are set on overprint, unless you need them to be.

        • 12. Include a die-cut layer

          For products that include die-cutting, include a die cut layer in the artwork file.

        • 1. How long will my n last?

          The lifetime of sticker depends on its usage. Paper stickers are generally great for indoor use while PVC or Vinyl stickers will last longer in direct sunlight or outside.

        • 2. What is the fastest delivery for n?

          The fastest delivery time for n is d. Please note that you have to submit your order before 11:00 AM (AEST). Late payment or upload of your artwork might further delay your order. If you select Online Proof or Digital Proof Print during the checkout process, the production will only begin after your approval.

        • 3. Which production techniques are used?

          Our n are printed using an inkjet printer.

        • 4. How will my product be delivered?

          All of our products are delivered in a securely packed cardboard box.

        • 5. I can't find what I'm looking for. Can I request a quote?

          If you can't find what you need, please call our customer service team at the above-mentioned number to help you place an order. You can also request a quote from our customer service team for special product configurations that are not available on our website.

        • 6. Which materials can I choose?

          We offer four different types of material for n: 1) Simili stickers, a paper material that is tearable and only suitable for indoor use. 2) Mirrorcoat stickers, also a paper material but with a mirror-like gloss on the surface. Not entirely waterproof and only suitable for indoor use. 3) Synthetic matte white stickers, a plastic-like material that is non-tearable and waterproof. Suitable for indoor and outdoor use. 4) Synthetic transparent stickers, also a plastic-like material, but with the added benefit of being transparent.

        • 7. Which refinements can I choose?

          We do not offer additional finishing on our n. If you wish to you use your n outdoor, please select our synthetic matte white or synthetic transparent n.

        • 8. How can I upload my files?

          Your file can be uploaded either before you checkout and pay, or after. Please note that uploading files late might result in a moved expected delivery date.

        • 9. Which formats can I upload?

          The best format for submitting print-ready files is PDF, under the PDF/X-1a standard. However you can also upload your file in JPEG, PNG, PSD, EPS, TIFF or AI format for an additional fee of AUD 10.00. Our graphic designers will then convert your file into a print-ready PDF file.